Preparations for using the cup printing machine

Preparations for using the cup printing machine

1. after the preparation is completed, shout " when starting the motor; Turned on "e;, Before starting the motor. (this is to prevent accidents caused by the operator being invisible when the mechanic repairs on the opposite side or behind the machine).

2. carefully observe the operation of the machine, take a cup to check the bonding effect of the paper cup, and check whether there is yellowing or damage to the paper cup at the preheating, main heating and knurling positions.

3. check the bonding effect of the bonding part to see if there is any poor connection. The bonding firmness of the cup bottom and bonding should be tearing and galling. If there is indirect non galling, it is suspected that the cup is leaking. The water test shall prevail.

4. during normal operation, if the machine is found or feels abnormal, the cup body shall be lifted first, and the machine can be stopped for inspection after knurling.

5. when the machine is restarted due to unexpected stoppage for a long time, the market shall be the fourth Take out five and check whether the knurled parts are bonded.

6. the operator of the cup printing machine shall pay attention to the forming conditions of the cup mouth, cup body and cup bottom at any time during normal production, and inspect the adhesion, size and appearance of the cup from time to time or one by one.

7. the staff shall concentrate on the operation. In case of abnormal sound or bad cup bottom forming, they shall stop the machine immediately for inspection to avoid losses.

8. the operator shall be serious and responsible during the production process, and test 8 cups with boiled water every hour.

9. before sealing the carton, the operator shall spot check the quantity of small packages. After the spot check is correct, cut and paste the product certificate or product pattern on the upper right corner of the left side of the carton, fill in the job number and production date in the carton, and seal the carton and stack it neatly at the designated position.